PCPE 95 Scale Inhibitor Intermediate
PCPE 95 is a phosphate ester
intermediate in the free acid form for a broad spectrum
application.
CUSTOMER BENEFITS
Can be diluted and neutralized by formulator to make low cost effective scale inhibitor
Effective against calcium carbonate, calcium sulfate, barium sulfate and iron scales in water
Is soluble in high calcium and high TDS brines
Finished blends perform well at low concentrations down to 5 ppm
Used at temps below 200 degrees
TYPICAL PHYSICAL PROPERTIES
Specific Gravity........1.425-1.435
Density (lbs/gal)..................11.91
pH.............................................< 2
Pour Point..............................5° F
Flash Point...........................None
Activity....................................70%
Total Phosphate....................50%
Solubility in:
Water..........................Soluble
Xylene.......................Insoluble
Isopropanol..............Insoluble
Handling Precautions:
Observe all normal safety precautions for handling industrial chemicals. Keep off skin and out of eyes. If eyes are contacted flush with water and seek medical attention. Consult the Material Safety Data Sheet for specific health and handling information.
FINISHED PRODUCT APPLICATIONS:
A typical blend would be approximately 33% by weight with
water and antifreeze agents.